How To Exit From The E5052A Measurement View - Agilent Technologies E5052A Service Manual

How to exit from the E5052A Measurement View

You need to exit from the E5052A Measurement View to perform some troubleshooting.
The following is the procedure to exit from the E5052A Measurement View.
Step 1. Connect the mouse and external keyboard to the connectors on the E5052A rear panel.
Step 2. Turn the instrument on.
Step 3. Press
Step 4. Click
Figure 4-1.
Figure 4-1 Password dialog box
Step 5. Enter the password
Step 6. Click
then.windows desktop screen appears with 4 icons (My Computer, My Network Places,
Recycle Bin, and E5052A.)
NOTE If you wish to return to the Measurement View, double-click "E5052A" icon.
NOTE If you need to shut down the E5052A and again turn on, perform in accordance with the
following procedure.
a. To get "Start" menu bar displayed, move the pointer to the bottom of the screen with
mouse.
b. Click "Start" and "Shut Down..." in the pull down menu. "Shut Down Windows" dialog
box opens.
c. Select "Shut down" button in the pull down menu.
d. Click "OK" button in the dialog box.
Chapter 4
How to exit from the E5052A Measurement View
key.
Service Menu - Administrator Menu
E5052 in the Password box and then click "OK" button.
Exit E5052A - OK on the menu bar. Then the E5052A exit the Measurement View,
. Password dialog box opens as shown in
Troubleshooting
85