Required equipment for the PM linearity adjustment
Description
Signal Generator
Power Amplifier (35dB)
Step Attenuator
Attenuator (3dB)
Blocking Capacitor
Low Pass Filter
Power Splitter
Power Sensor
Power Meter
N(m)-N(m) Cable
N(m)-N(m) Adapter
N(f)-SMA(m) Adapter
PM Temp Adjustment
The purpose of this procedure is to adjust the PM temp of the A1 freq/power detector
module.
Required equipment for the PM temp adjustment
None
PM Flatness Adjustment
The purpose of this procedure is to adjust the PM flatness of the A1 freq/power detector
module.
Chapter 3
Required Adjustment after Replacing Assembly
Recommended Model
Agilent E8257D option UNR,
UNT
R & K A3000-2H-R
Agilent 8496H
Agilent 8491A option 003
Agilent 11742A
Mini-Circuits SLP-70 (70MHz)
Agilent 11667A
Agilent 8481A
Agilent E4419A/B
Agilent N6314A (p/n
8120-8862)
Agilent p/n 1250-1475
Agilent p/n 1250-1562
Adjustment
79