Ssh Client Configuration Examples; When Switch Acts As Client For Password Authentication - HP 3600 v2 Series Security Configuration Manual

Figure 110 SSH client configuration interface 2)
Click Open to connect to the server. If the connection is normal, you will be prompted to enter the
username. After entering the username (client002), you can enter the configuration interface of the
server.

SSH client configuration examples

When switch acts as client for password authentication

Network requirements
As shown in
B (the SSH server) through the SSH protocol. Configure the username client001 and the password aabbcc
for the SSH client on Switch B.
Figure 111 Network diagram
Configuration procedure
Configure the SSH server.
1.
# Generate the RSA key pairs.
<SwitchB> system-view
Figure 1 1 1, Switch A (the SSH client) must pass password authentication to log in to Switch
290