Displaying And Maintaining Ead Fast Deployment; Ead Fast Deployment Configuration Example - HP 3600 v2 Series Security Configuration Manual

Displaying and maintaining EAD fast deployment

To do...
Display 802.1X session
information, statistics, or
configuration information

EAD fast deployment configuration example

Network requirements
As shown in
the network access device, and they use DHCP to obtain IP addresses.
Deploy EAD solution for the intranet so that all hosts must pass 802.1X authentication to access the
network.
To allow all intranet users to install and update 802.1X client program from a web server, configure the
following:
• Allow unauthenticated users to access the segment of 192.168.2.0/24, and to obtain IP address on
the segment of 192.168.1.0/24 through DHCP.
Redirect unauthenticated users to a preconfigured web page when the users use a web browser to
•
access any external network except 192.168.2.0/24. The web page allows users to download the
802.1X client program.
• Allow authenticated 802.1X users to access the network.
Figure 47 Network diagram
Figure 47, the hosts on the intranet 192.168.1.0/24 are attached to port Ethernet 1/0/1 of
Use the command...
display dot1x [ sessions | statistics ]
[ interface interface-list ] [ | { begin |
exclude | include } regular-expression ]
108
Remarks
Available in any view