HP 3600 v2 Series Security Configuration Manual page 297

NOTE:
During SSH server configuration, the client public key is required. Use the client software to generate RSA
key pairs on the client before configuring the SSH server.
Configure the SSH client.
1.
# Generate the RSA key pairs.
Run PuTTYGen.exe, select SSH-2 RSA and click Generate.
Figure 105 Generate a key pair on the client 1)
When the generator is generating the key pair, you must move the mouse continuously and keep the
mouse off the green progress bar shown in
the key pair generating process will be stopped.
Figure 106. Otherwise, the progress bar stops moving and
286