Figure 14 Add an access device
# Add a user for device management
Log in to the iMC management platform, click the User tab, and select Device Management User from the
navigation tree to enter the Device Management User page. Then, click Add to enter the Add Device
Management User window and perform the following configurations as shown in
Add a user named hello@bbb and specify the password
•
Select SSH as the service type
•
•
Set the EXEC privilege level to 3. This value identifies the privilege level of the SSH user after login
and defaults to 0.
Specify the IP address range of the hosts to be managed as 10.1.1.0 to 10.1.1.255
•
Click OK to finish the operation
•
53
Figure
15.