Public Key Configuration Examples; Manually Specifying The Peer Public Key On The Local Device - HP 3600 v2 Series Security Configuration Manual

Public key configuration examples

Manually specifying the peer public key on the local device

Network requirements
As shown in
peer device) through a digital signature. Before configuring authentication parameters on Device B,
configure the public key of Device A on Device B.
Configure Device B to use the asymmetric key algorithm of RSA to authenticate Device A.
•
Manually specify the host public key of Device A's public key pair on Device B.
•
Figure 93 Network diagram
Configuration procedure
Configure Device A.
1.
# Create local RSA key pairs on Device A, setting the modulus length to the default, 1024 bits.
<DeviceA> system-view
[DeviceA] public-key local create rsa
The range of public key size is (512 ~ 2048).
NOTES: If the key modulus is greater than 512,
It will take a few minutes.
Press CTRL+C to abort.
Input the bits of the modulus[default = 1024]:
Generating Keys...
++++++
++++++
++++++++
++++++++
# Display the public keys of the local RSA key pairs.
[DeviceA] display public-key local rsa public
=====================================================
Time of Key pair created: 09:50:06
Key name: HOST_KEY
Key type: RSA Encryption Key
=====================================================
Key code:
30819F300D06092A864886F70D010101050003818D0030818902818100D90003FA95F5A44A2A2CD3F814F
9854C4421B57CAC64CFFE4782A87B0360B600497D87162D1F398E6E5E51E5E353B3A9AB16C9E766BD995C
669A784AD597D0FB3AA9F7202C507072B19C3C50A0D7AD3994E14ABC62DB125035EA326470034DC078B2B
AA3BC3BCA80AAB5EE01986BD1EF64B42F17CCAE4A77F1EF999B2BF9C4A10203010001
=====================================================
Figure 93, to prevent illegal access, Device B (the local device) authenticates Device A (the
2011/03/07
235