HP 3600 v2 Series Security Configuration Manual page 74

[Switch] domain dm1
# Configure the ISP domain to use RADIUS scheme rs1.
[Switch-isp-dm1] authentication portal radius-scheme rs1
[Switch-isp-dm1] authorization portal radius-scheme rs1
[Switch-isp-dm1] accounting portal radius-scheme rs1
[Switch-isp-dm1] quit
# Configure dm1 as the default ISP domain for all users. Then, if a user enters a username without any
ISP domain at login, the authentication and accounting methods of the default domain will be used for
the user.
[Switch] domain default enable dm1
Configure portal authentication
•
# Configure the portal server.
[Switch] portal
http://10.1.1.1:8080/portal
# Enable portal authentication on the interface connecting the host.
[Switch] interface vlan-interface 2
[Switch-Vlan-interface2] portal server newpt method direct
[Switch-Vlan-interface2] quit
Verify the configuration
4.
The user can initiate portal authentication by using the iNode client or by accessing a web page. All of
the initiated web
http://10.1.1.1:8080/portal. Before passing portal authentication, the user can access only the
authentication page. After passing portal authentication, the user can access the Internet.
After the user passes the portal authentication, use the following command to view the portal user
information on the switch.
[Switch] display portal user interface vlan-interface 2
Index:19
State:ONLINE
SubState:NONE
ACL:NONE
Work-mode:stand-alone
MAC IP
---------------------------------------------------------------------
0015-e9a6-7cfe 192.168.1.58
Total 1 user(s) matched, 1 listed.
# Use the display connection command to view the connection information on the switch.
[Switch] display connection
Index=20 ,Username=portal@dm1
IP=192.168.1.58
IPv6=N/A
MAC=00-15-E9-A6-7C-FE
Total 1 connection(s) matched.
server newpt ip
requests will be redirected
Vlan
2
63
10.1.1.1 key portal
to the portal
Interface
Vlan-interface2
port 50100
authentication page
url
at