HP 3600 v2 Series Security Configuration Manual page 68

Figure 17 Add an access device
# Add a charging plan.
Click the Service tab, and select Accounting Manager > Charging Plans from the navigation tree to enter
the charging plan configuration page. Then, click Add to enter the Add Charging Plan page and perform
the following configurations:
Add a plan named UserAcct
•
Select Flat rate as the charging template
•
• In the Basic Plan Settings field, configure the fixed fee as 120 dollars per month
In the Service Usage Limit field, set the Usage Threshold to 120 hours, allowing the user to access
•
the Internet for up to 120 hours per month
• Adopt the default settings for other parameters and click OK to finish the operation.
Figure 18 Add a charging policy
# Add a service.
57