Network; Backup; System - Lightware HDMI-TPS-TX210 User Manual


  
5. Software Control - Lightware Device Controller
5.9.2. Network
Network tab in Settings menu
IP address and DHCP settings can be set on this tab. Always press the Apply settings button to save changes.
Factory defaults settings can be recalled with a dedicated button.
5.9.3. Backup
Details about this function can be found in the Configuration Cloning (Backup Tab) section.
HDMI-TPS-TX200 series – User's Manual
5.9.4. System
Three functions are available under System tab:
▪ Download system log - saving the file of the device.
Load factory defaults - recalling factory defaults settings and values. All factory default settings are
▪
listed in the Factory Default Settings
▪ Reboot - rebooting the system.
System tab in Settings menu
section.
39