Introduction; Description; Compatible Devices; Box Contents - Lightware HDMI-TPS-TX210 User Manual


  

1. Introduction

1
I ntroduction
Thank You for choosing Lightware's HDMI-TPS-TX200 series device. In the
first chapter we would like to introduce the device highlighting the most
important features in the below listed sections:

Description

Î

Compatible Devices

Î

Box Contents

Î
Features
Î
Model Comparison
Î
Typical Application
Î
HDMI-TPS-TX200 series – User's Manual
1.1. Description
This transmitter family was designed to extend digital video signals
(e.g. HDMI 1.4 and DP 1.1) and audio signals (analog stereo audio
from local input or embedded 7.1 HBR audio). Video signals with
HDCP encryption are also supported. Many combinations of the
audio/video signals are available to transmit.
Using the factory, custom or transparent EDID emulation the user
can fix and lock EDID data on each input connector. Advanced EDID
Management forces the required resolution from any video source
and fixes the output format conforming to the system requirements.
The unit offers bi-directional and transparent IR, RS-232 and Ethernet
transmission. Furthermore, the IR and RS-232 connection support
command injection, allowing them to send any IR or RS-232 control
command directly from the LAN connection.
PoE-compatible remote powering (Power over Ethernet) is available
through a single CAT cable, but local power supply can also be used.
The device can be mounted on a rack shelf or used standalone.
HDMI-TPS-TX200 series is compatible with both the HDBaseT
extenders and matrix switchers.
Advanced models contain an 8-pole Phoenix
configurable General Purpose Input and Output pins. Using the built-in
Event manager with the GPIO pins, many controlling functions can be
established in a simple way.
Model Denomination
HDBaseT TPS extender
TM
HDMI-TPS-TX220
Input interface Transmitter Number of inputs
HDBaseT TPS extender
TM
SW4-TPS-TX240
Switcher with 4 inputs Transmitter Number of inputs
1.2. Compatible Devices
The transmitter is compatible with other Lightware TPS receivers,
matrix TPS and TPS2 boards, 25G TPS2 boards, as well as third-party
HDBaseT-extenders, displays, but not compatible with the phased out
TPS-90 extenders.
HDBaseT
HDBaseT Alliance.
1.3. Box Contents
TM
HDMI-TPS-TX200
connector with user-
® series transmitter
Number of outputs
Phoenix
3-pole connector
* Only for the following models: HDMI-TPS-TX220, DP-TPS-TX220,
DVI-HDCP-TPS-TX220, SW4-TPS-TX240.
Number of outputs
The transmitter is compatible
with any third-party HDBaseT
device.
and the HDBaseT Alliance logo are trademarks of the
TM
12V DC adaptor with Infrared emitter unit
interchangeable plugs
Combicon Safety & warranty info, Phoenix Combicon
® ®
Quick Start Guide 8-pole connector *
7
TM