Ip Address Of The Built-In Ethernet Port - Mitsubishi Electric Q03UDVCPU User Manual

Qnucpu series (communication via built-in ethernet port)
Hide thumbs Also See for Q03UDVCPU:
Table of Contents

Advertisement

11.1

IP Address of the Built-in Ethernet Port

For IP address of the built-in Ethernet port, a value of the built-in Ethernet port setting of the PLC Parameter is set at
the initial processing of the CPU module. When this function is used, the value stored in the IP address storage area
(flash ROM) will be set to the IP address of the built-in Ethernet port which is set during the initial processing of the
CPU module, instead of the value set in the parameter.
(1) Write and clear operation to the IP address storage area (flash ROM)
Write a value of IP address to the IP address storage area (flash ROM). The special relay and special register are
used to perform the write and clear operations.
(2) Execution timing of writing to and clearing the IP address storage area (flash
ROM)
Write and clear processing are executed in the END processing. Therefore, the scan time is increased during
execution.
[When using parameters]
Built-in Ethernet port
IP address
Subnet mask pattern
Default router IP address
The IP address in the parameter file is set.
[When using the IP address change function]
Built-in Ethernet port
IP address
Subnet mask pattern
Default router IP address
The IP address in the IP address
storage area (flash ROM) is set.
Special register
SD1292
IP address
SD1293
SD1294
Subnet mask
pattern
SD1295
SD1296
Default router
IP address
SD1297
CHAPTER 11 IP ADDRESS CHANGE FUNCTION
Parameter file
Built-in Ethernet port setting
192.168.3.39
IP address
255.255.255.0
Subnet mask pattern
192.168.3.254
Default router IP address
Parameter file
Built-in Ethernet port setting
IP address
Subnet mask pattern
192.168.3.40
Default router IP address
255.255.255.0
192.168.3.254
IP address storage area (flash ROM)
IP address
Subnet mask pattern
Default router IP address
IP address storage area
(flash ROM)
IP address
Subnet mask
pattern
Write execution
Default router
(SM1292 ON)
IP address
192.168.3.39
255.255.255.0
192.168.3.254
192.168.3.39
255.255.255.0
192.168.3.254
192.168.3.40
255.255.255.0
192.168.3.254
171
11

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents