Mitsubishi Electric Q03UDVCPU User Manual page 100

• For "Open Setting"
Item
Protocol
Open System
TCP Connection
Host Station Port No.
Destination IP Address
Destination Port No.
*1 Do not specify 1388
2)
(b) Devices used in the program
The following table lists the device numbers and applications used in the sample program.
Device number
M3000
D3000 and D3001
M300 and M301
D300 and D303
M3002
M3003
D5000 to D5001
M500 to M501
SD1282
SD1286
SD1288
M3001
D500 and higher
M5002
M5003
D400 to D404
D450 to D451
D460 to D464
98
UDP
Socket Communication
Blank
1000 (Setting range: 0001
H
192.168.3.40 (Setting range: 0.0.0.1 to 223.255.255.254/255.255.255.255)
1000 (Setting range: 0001
H
to 1391 (5000 to 5009) because these ports are used by the system. (
H H
Send direction
SP.SOCSND instruction control data
SP.SOCSND instruction completion device
Send data length and send data (6 bytes of 12
Normal send indication
Send error indication
SP.SOCRCV instruction control data
SP.SOCRCV instruction completion device
Open completion signal
Receive state signal
Connection state signal
Target change direction
Receive data length and receive data
Normal receive indication
Receive error indication
SP.SOCCSET instruction control data
SP.SOCCINF instruction control data
SP.SOCCINF instruction connection information
Setting
to 1387 and 1392 to FFFE
H H H
to FFFE /FFFF (1 to 65534/65535))
H H H
Application
, 34
H
(1 to 4999, 5010 to 65534))
H
Page 200, Appendix
, 56 , 78 , 9A , and BC )
H H H H H
*1