Mitsubishi Electric Q03UDVCPU User Manual page 102

(2) Simultaneous broadcast
For simultaneous broadcast using UDP, set the parameters as follows.
• Destination IP Address: FF.FF.FF.FF
• Destination Port No.: FFFF
CPU module
(IP address: xx.xx.xx.xx, Subnet mask: 255.255.255.0)
Destination IP
Address
Other than FF.FF.FF.FF Other than FFFF
H
Other than FF.FF.FF.FF FFFF
H
FF.FF.FF.FF Other than FFFF
H
FF.FF.FF.FF FFFF
H
100
H
Sending data from port No.A of the
CPU module to each port No.N of all
Port No.A
external devices.
Destination Port
No.
Receives only the data sent from the specified IP
address and port No. among the entire data sent to
H
the host station port No.
Receives the data sent from all ports of the specified
IP address among the entire data sent to the host
H
station port No.
Receives the data sent from the specified port No. of
all the IP addresses among the entire data sent to the
H
host station port No.
Receives all data that have sent to the host station
H
port No.
H
Ethernet
Port No.L
Port No.N
Port No.M
Port No.N
Port No.N
Receiving
External device 1
(IP address: xx.xx.xx.yy)
External device 2
(IP address: xx.xx.xx.zz)
External device 3
(IP address: xx.xx.xx.ww)
Sending
Sends data from the host
station port No. to the
specified IP address and port
No.
N/A
Sends data to the port No.
specified in the settings for
simultaneous broadcast.
N/A