Mitsubishi Electric Q03UDVCPU User Manual page 161

pm-write
●
[Function]
[Specification format]
[Note]
passwd-rd
●
[Function]
[Specification format 1]
[Specification format 2]
[Specification format 3]
[Note]
Transfers program cache memory to the program memory.
quote pm-write
The following message is displayed as an execution result upon completion.
200 Command successful
Before writing data, set the CPU module to STOP.
Set the read password (file password 32) that has been registered in a target file to transfer
in the CPU module.
Displays and clears the read password that has been set in the CPU module.
Use this command only when a read password has been registered in the target file to
transfer.
The CPU module checks a password when a specified file is accessed.
When setting a read password in the CPU module
quote passwd-rd "read password"
The following message is displayed as an execution result at the normal end.
• 200 Command successful
When displaying the read password that has been set in the CPU module
quote passwd-rd
Any of the following is displayed as an execution result at the normal end.
• When the command is executed with a read password set: 200 Read-password is "read
password."
• When the command is executed with no read passwords set: 200 Read-password is not
set.
When clearing the read password that has been set in the CPU module
quote passwd-rd c or quote passwd-rd C
The following message is displayed as an execution result at the normal end.
• 200 Command successful
• A read password can be set for the CPU module.
When the target file to transfer is changed, re-set a read password for a new target file if
the read password has been registered in the new file.
• Re-set a read password before accessing the target file to transfer because the
password that has been set using the command is initialized or cleared upon login to the
CPU module.
CHAPTER 9 FILE TRANSFER FUNCTION (FTP)
9
159