Mitsubishi Electric Q03UDVCPU User Manual page 39

(3) Routing parameter settings
For communication through multiple networks, the communication path needs to be set. For this purpose, routing
parameters need to be set for relaying CPU modules.
Project window
Item
Target Network No.
Relay Network No.
Relay Station No.
To send data to the network No. ,
data passes through the station with the own network No.
No routing parameter setting is required for
network No. because the module of
network No. is mounted on the relay station.
Network No.
(Relay station)
[Parameter]
[Ethernet/CC IE/MELSECNET]
Set the network number of the transfer destination network.
Set the network numbers of relay stations.
Set the station numbers of relay stations.
CHAPTER 3 CONNECTION OF PROGRAMMING TOOLS AND GOT
and station No.
Station that needs routing parameters
Network No.
[Network Parameter]
buttons
Description
.
Setting range
1 to 239
1 to 239
0 to 120
37
3