Mitsubishi Electric Q03UDVCPU User Manual page 206

Qnucpu series (communication via built-in ethernet port)
Hide thumbs Also See for Q03UDVCPU:
Table of Contents

Advertisement

Item
Data communications using the predefined protocol
SLMP frame send instruction
*1
Available commands are limited. (
*2
The "quote cpuchg" command cannot be used. (
*3
Only the default router can be specified.
*4
Settings are fixed to the following: Interval timer: 5 seconds, Resend timer: 8 times.
*5
Up to 16 devices can be connected by setting "MELSOFT Connection" for user connections in PLC parameter.
*6
The MELSOFT transmission port corresponds to the GX Developer transmission port of QJ71E71-100.
*7
Up to 17 devices can be connected (including one system connection) by setting "MELSOFT Connection" for user
connections in the network parameter.
*8
For processing on the external device side, refer to Page 205, Appendix 4 (2).
*9
Executable with the socket communication function. Refer to (3) in this section for the differences.
Check the versions of the CPU module and programming tool before using the function. (
*10
Executable with the socket communication function.
Check the versions of the CPU module and programming tool before using the function. (
*11
Check the versions of the CPU module and programming tool before using the function. (
*12
In the case of MELSOFT connection or direct connection, multiple networks can be relayed if the MELSOFT connection
extended setting is used. However, MELSECNET/10 cannot be related.
*13
The function is available for the High-speed Universal model QCPU. Check the versions of the CPU module before
using the function. (
Remark
For Ethernet modules, refer to the following.
Q Corresponding Ethernet Interface Module User's Manual (Basic)
204
Description
Enables the Ethernet module to send/receive data to/from
an external device by using the protocol for the external
device. The external device side protocol can be easily
selected, or created/edited from the Predefined Protocol
Library of GX Works2.
Sends MC protocol messages (QnA-compatible 3E frame)
from the CPU module to external devices connected on the
Ethernet network.
Page 65, Section 5.2)
Page 149, Section 9.4)
Page 201, Appendix 3)
Availability
Built-in
Ethernet port
QJ71E71-100
QCPU
*11
*13
×
Page 201, Appendix 3)
Page 201, Appendix 3)
Page 201, Appendix 3)

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents