Mitsubishi Electric Q03UDVCPU User Manual page 162

passwd-wr
●
[Function]
[Specification format 1]
[Specification format 2]
[Specification format 3]
[Note]
160
Sets the write password (file password 32) that has been registered in a target file to
transfer in the CPU module.
Displays and clears the write password that has been set in the CPU module.
Use this command only when a write password has been registered in the target file to
transfer.
The CPU module checks a password when a specified file is accessed.
When setting a write password in the CPU module
quote passwd-wr "write password"
The following message is displayed as an execution result at the normal end.
• 200 Command successful
When displaying the write password that has been set in the CPU module
quote passwd-wr
Any of the following messages is displayed as an execution result at the normal end.
• When the command is executed with a write password set: 200 Write-password is "write
password."
• When the command is executed with no write passwords set: 200 Write-password is not
set.
When clearing the write password that has been set in the CPU module
quote passwd-wr c or quote passwd-wr C
The following message is displayed as an execution result at the normal end.
• 200 Command successful
• A write password can be set for the CPU module.
When the target file to transfer is changed, re-set a write password for a new target file if
the write password has been registered in the new file.
• Re-set a write password before accessing the target file to transfer because the
password that has been set using the command is initialized or cleared upon login to the
CPU module.