Putting The Conference On Hold; Terminating The Conference; Putting One Participant On Hold; Speaking To One Participant In Private - Snom D712 User Manual

D712/710 User Manual
Press or / on the navigation key - depending on your firmware version - to select individual
participants and to return to the conference screen.

Putting the conference on hold

1. Press or /
Hold
2. Press to put all participants on hold. Technically, you are, in effect, terminating the
conference. You will see the "Calls on Hold" screen (see "Holding multiple calls" on page 47).
Cnf.On
3. Press to restart the conference, i.e., start another conference with all calls on hold.

Terminating the conference

1. Press / or /
2. Press .

Putting one participant on hold

1. Press / or /
Hold
2. Press . You will simultaneously be connected to the other participant.
3. To start the conference anew, press
Cnf.On
.

Speaking to one participant in private

1. Press / or / , depending on your FW version, to select a participant.
2. Press to speak to that participant in private, simultaneously putting the other participant on
hold.
Hold
3. Press to put the connected participant on hold.
Cnf.On
4. Press to start the conference anew.
, depending on your FW version, to select the conference.
, depending on your FW version, to select the conference.
, depending on your FW version, to select a participant.
Hold
to put the connected participant on hold, then
49
Using the Phone