Putting The Conference On Hold; Terminating The Conference; Transferring Calls; Attended Transfer - Snom D375 User Manual

D375 | Snom 370 User Manual
1. Press to put the call waiting on-screen.
2. Press or the blinking line key to accept the call. The conference/current call is put on hold.
3. Press to start or restart the conference with the additional participant.
• Calling an intended participant:
1. Press to put the conference on hold.
2. Dial the number of the new participant.
3. With the new participant on the line, press

Putting the conference on hold

• If one of the participants is on-screen (Fig. 2 or 3), you must first return to the screen with all
participants. See Conference screen navigation.
• With all participants on-screen (Fig. 1), press
you will see the "Calls on Hold" screen (see Holding multiple calls, Fig. H-4).
• To restart the conference, press

Terminating the conference

1. Put the conference screen (Fig. 1) on-screen, if it is not.
2. Press .

Transferring calls

You can transfer connected calls as well as calls ringing on your phone.
• When you have a call on the line, there are two ways to transfer it to a third party:
◦
Announcing the call to the third party first, to make sure the call is welcome and will be
accepted: Attended transfer;
◦ Transferring the call unannounced: Blind transfer. There will be no feedback on whether the
third party is available and/or picking up the call.
• When a call is ringing on your phone, you can transfer it to a third party without answering it first
(blind transfer only).

Attended transfer

1. Put the call on hold.
2. Dial the number you wish to transfer the call to and announce the call.
3. If the third party wishes to accept the call, press

Blind transfer

1. With a call ringing or on the line, press
2. Dial the number of third party you intend to transfer the call to.
3. Press .
.
. Technically, you are ending the conference;
.
and
.
53
.
Using the Phone