Conference; Initiating A Conference; Conference Screen Navigation; Putting The Conference On Hold - Snom 720 User Manual

snom 720 User Manual
◦ Use to scroll through the held calls. Your input on the phone's keys will affect the call
on-screen at the time, i.e., the caller shown in the contact area of the display, preceded by the
symbol .
To connect to the held call currently on-screen, press
◦
again to put it back on hold.
◦ To terminate a held call, put it on-screen, connect to it, and press
◦ To transfer a held call (blind transfer), put it on-screen, press
press .

Conference

The maximum number of participants is five (your phone and four others).

Initiating a conference

1. Call the first intended participant and put him or her on hold.
2. Call the next intended participant and put him or her on hold.
◦ Continue likewise with the third and fourth participants, if applicable.
You do not need to put the last participant on hold before starting the conference.
◦
3. Pess Cnf.On to start the conference.

Conference screen navigation

Your input on the phone's keys will affect the caller/callee(s) shown in the context area of the display.
For example:
If you have initiated a conference with three other participants, the total number of participants
◦
other than yourself is shown in the status bar.
First participant
The upper line in the context area displays the number or name of the first of the other three
◦
participants. Press

Putting the conference on hold

Press to put all participants on hold. Technically, you are, in effect, terminating the conference.
Press Cnf.On to restart the conference, i.e., start another conference with all calls on hold.

Adding a participant

• Adding an incoming call:
www.InternetVoipPhone.co.uk | sales@internetvoipphone.co.uk | 0800 088 48 46
Second participant
to view the other participants.
48
Using the Phone
to connect to it. Press
.
Xfer , dial the number, and
Third participant