Accepting Calls; Putting Calls On Hold; Call Forwarding - Snom 715 Quick Start Manual

E
N snom 715 Quick Start Guide
G
L
Configuring & modifying identities
I
Web interface > Identity 1-4 > Login. See "Initializing and registering the phone" on
S
H
page 9 for required and optional information.
Using the phone
Making calls
• the number on the alphanumeric keypad and pick up the handset or
Enter
• up the handset, enter the number,
pick
• enter the number,
,
Speed Dial
Lift the receiver or press . Type the speed dial number or character on the
alphanumeric keypad and press P.
Setting the speed dial numbers: Web interface > Speed Dial. Type each phone
number with any necessary area code and/or country code etc. without spaces,
hyphens, etc. into one of the textboxes of the table. Do not add any names or other
data. Example: To enter (911) 555-1234, type 9115551234.
Emergency Numbers
These numbers can be called even when the keyboard is locked. The numbers "911",
"112", "110", and "999" are preset.
Change/add numbers: Web interface > Preferences > Lock Keyboard > Emergency
Numbers (space separated). Type each number without spaces, hyphens, etc. between
the digits, separate the individual numbers with one empty space between them.
Example: 911 112 110 999.

Accepting calls

• the handset: Pick up the handset
With
• a headset: Press or blinking line key
With
• the speakerphone: Press
With

Putting calls on hold

Press the line key of the call. The LED starts to blink
slowly. Press the line key again to resume the call. With
more than one call on hold, select call with
press to resume the call.
Conference
(3 participants, including you)
1. Your phone number: 157. Put first party (153) on hold.
14
or
/ , then
1.05
2. Call second party (154). Put on hold.
Call third party (172). Press
conference.
3. Press to stop the conference and put all parties on hold.
Talking to one of the parties alone: Press the blinking line key or
select line with / and .
4. Resume conference: Press .
Call transfer
Attended transfer
Put the call on hold > Dial the number that you wish to transfer the call to > If the
third party wishes to accept the call, press
Blind transfer
With call ringing or on the line: Press
transferred to > press .

Call forwarding

1. All incoming calls.
• on: > Target when forwarding: enter number >
Turning
• off:
Turning
2. When busy.
• on: > 2 Call Features > 1 Call Forwarding > 2 When busy >
Turning
2 Target: enter number >
Press briefly to return to previous screen or for 2 seconds to return
to idle screen
• off: > 2 Call Features > 1 Call Forwarding > 2 When busy > 1
Turning
Activate: Press 1
screen or for 2 seconds to return to idle screen
3. When call is not picked up.
• on: > 2 Call Features > 1 Call Forwarding > 3 On Timeout > 2
Turning
Target: enter number >
> 1 Activate: Press
previous screen or for 2 seconds to return to idle screen
• off: > 2 Call Features > 1 Call Forwarding > 3 On Timeout >
Turning
1 Activate: Press 1
screen or for 2 seconds to return to idle screen
snom 715 Quick Start Guide
to start
and .
> dial the phone number the call is to be
.
> 1 Activate: Press 1

> Press briefly to return to previous

> 3 Time: enter number of seconds >
1 > Press briefly to return to

> Press briefly to return to previous

E
N
G
L
I
S
H
>
15