snom UC Edition and snom 715/D715/710
P
utting one participant on hold
1. Use
/
to select the participant (Fig. 2 and 3, above).
2. With the selected participant marked by , press Hold .
3. Press Cnf.On to return the held participant to the conference.
D
ropping a participant
1. Use
/
to select the participant (Fig. 2 and 3, above).
2. With the selected participant marked by , press
A
dding a participant
•
Adding an incoming call:
1. Press
or the blinking line key to accept the call. The conference is put on hold.
2. Press Hold to put the new caller on hold.
3. Press Cnf.On to restart the conference with all held calls.
•
Calling a new participant:
1. With "Conference" marked by
2. Call the new participant.
3. Press Hold to put the new participant on hold.
4. Press Cnf.On to restart the conference with all held calls..
P
utting the conference on hold
•
If one of the participants is marked by , you must first scroll to the conference symbol.
•
With "Conference" marked by
conference; you will see the "Calls on Hold" screen (see "Holding multiple calls", Fig. H-4).
To restart the conference, press Cnf.On .
•
T
erminating the conference
1. With the conference symbol marked by , press Hold to put all participants on hold.
2. Select each participant in turn and press
to terminate the connection to this participant.
(Fig. 1, above), press Hold to put the conference on hold.
(Fig. 1, above), press Hold . Technically, you are ending the
.
37
Conference - local