Advertisement
Table of Contents
2/28/2019
How to configure snom 700/ D7XX Series for 3CX
This guide applies to v15.5 only.
On this topic
Supported Models: snom 700/D7XX series
snom 700 series
snom D7XX series
End of Life
Step 1: Upgrade to the Required firmware
Step 2: Factory Reset the IP Phone
Step 3: Provision the phone
Local LAN or SBC: Provision via Plug'n'Play
Supported Models: snom 700/D7XX series
snom 700 series
● snom 715
snom D7XX series
● snom D712
● snom D715
● snom D725
● snom D745
https://www.3cx.com/sip-phones/snom-710-720-760/
Auto Provision YOUR snom 7/D7 IP Phones for 3CX v15
1/5
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Snom 700 Series
Summary of Contents for Snom 700 Series
- Page 1 2/28/2019 Auto Provision YOUR snom 7/D7 IP Phones for 3CX v15 How to configure snom 700/ D7XX Series for 3CX This guide applies to v15.5 only. On this topic Supported Models: snom 700/D7XX series snom 700 series snom D7XX series...
- Page 2 2/28/2019 Auto Provision YOUR snom 7/D7 IP Phones for 3CX v15 ● snom D765 ● snom D785 End of Life ● snom 710 **See Limitations ● snom D710 **See Limitations ● snom 720 **See Limitations ● snom 760 **See Limitations Step 1: Upgrade to the Required firmware Ensure that the phone is running on the required firmware by 3CX.
- Page 3 2/28/2019 Auto Provision YOUR snom 7/D7 IP Phones for 3CX v15 4. All major provisioning settings are pre-populated. If your PBX has multiple network cards, select to which network this IP phone is connected. 5. Click “OK”. The phone will configure automatically and will reboot to finalize the setup.
- Page 4 2/28/2019 Auto Provision YOUR snom 7/D7 IP Phones for 3CX v15 5. Switch the “Provisioning Method” to “Direct SIP (Stun - Remote)” and click “OK”. 6. You can make sure that the extension is ready to be configured via RPS by checking the “Event Log”...
- Page 5 2/28/2019 Auto Provision YOUR snom 7/D7 IP Phones for 3CX v15 Note: Ensure that the input mode is set to digits (green box). Step 4: Extended Phone Configuration IP phones can be tweaked to match the user’s needs. Those might be skipped if they are not desired and the phone will be rolled out in a default configuration.
Need help?
Do you have a question about the 700 Series and is the answer not in the manual?
Questions and answers