snom 715 User Manual
Putting the conference on hold
Put all participants on hold. Technically, you are, in effect, terminating the conference. You will see the
"Calls on Hold" screen (see "Holding multiple calls" on page 47).
Press Cnf.On to restart the conference, i.e., start another conference with all calls on hold.
Adding a participant
•
Adding an incoming call:
1. Press
or the blinking line key to accept the call. The conference is put on hold.
2. Press Cnf.On to start a conference with all held calls, including the additional participant.
•
Calling a new participant:
1. Press Hold to put the conference on hold.
2. Dial the number of the new participant.
3. With the new participant on the line, press Cnf.On .
Terminating the conference
1. Press Hold to put all participants on hold.
2. Select each participant in turn and press
Putting one participant on hold
1. Press
or
, depending on your FW version, to select the participant.
2. Press Hold .
3. Press Cnf.On to return the held participant to conference.
Speaking to one participant in private
1. Press
or
, depending on your FW version, to select the participant.
1. Press
to speak to the selected participant in private, simultaneously putting the other
participant(s) on hold.
2. To restart the conference, press Cnf.On .
Dropping a participant
1. Press
or
, depending on your FW version, to select the participant.
2. Press
to terminate the connection to this participant.
www.InternetVoipPhone.co.uk | sales@internetvoipphone.co.uk | 0800 088 48 46
.
49
Using the Phone