Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for Snom D735
Summary of Contents for Snom D735
- Page 1 Snom D735 User's Manual Ver1.0.1 May 8 2019...
- Page 2 Thank you for purchasing SnomD735. Make sure and acknowledge that you have read this manual before using SnomD735. Package Contents: 1.Main Case 2.Handset 3.Handset Cable 4.LAN cable 5.Quick Start Guide manual 6.AC Adapter Disclaimer * This document is subject to change without prior notice. * A possibility of noise, broken voice, or disconnection may occur because of customers’...
- Page 3 Snom D735 Snom D735 is a phone device that can be used with our service. It cannot be used as a typical phone. The customer must subscribe to an Internet Service Provider to be able to use the device. Customer with no broadband router...
- Page 4 Keypad Familiarization 1. Navigation key - for navigation within the display menu and the phone book. 2. Enter key - to confirm actions, selections and inputs. *Always press the “ENTER Key” after inputting the numbers dialed 3. Cancel Key - to cancel actions or inputs. 4.
- Page 5 1. Verify device’s IP Address. Press [Setting Key] Select [Information], then [System Info]. IP Address will appear. 2. Snom D735 and the PC must be connected to the same network. Launch any web browser such as Internet Explorer. Enter IP Address observing the format below.
- Page 6 3. On the [Setup] options, select [Identity 1]. Unique Unique Password Login server：25060 Login server：25060 Unique ユニーク ユニーク パスワード ログインサーバ:25060 ログインサーバ:25060 Extension Number ユニーク Display Name and Account: Enter [Unique ID]. Password: Enter [Registered Password] . Registrar and Outbound Proxy: Enter [Login Server] and [:25060] after login server.
- Page 7 4. On the [Setup] options, select [Identity 1], then click [SIP]. When you are in a call, another call coming in will be announced visually by the flashing call LED and by the symbol appearing in the function key line (Fig. 1); it will also be announced acoustically by a double beep. You can also change the setting If you want to switch to visual or acoustic announcement only or turn call waiting off completely.
- Page 8 5. On the [Setup] options, select [Identity 1], then click [RTP]. Codec : Enter [pcmu,telephone-event]. * If you use our call center system, CTI, please select “off” for RTP Encryption *Click [Save] to save changes. 6. On the [Setup] options, select [Preferences]. Web Interface Language: Select [English].
- Page 9 7. On the [Setup] options, select [Preferences], then click [Appearance]. Number Display Style: Select [Number]. *Click [Save] to save changes 8. On the [Setup] options, select [Preferences], then click [Audio]. Tone Scheme: Select [Japan]. *Click [Save] to save changes...
- Page 10 9. On the [Setup] options, select [Function Keys] Setting Key Allocations TRANSFER Type: Select [DTMF] TRANSFER Number: Enter [#9] *Click [Save] to save changes...
- Page 11 10. On the [Setup] options, select [Advanced] ntp.jst.mfeed.ad.jp NTP Time Server: Enter [ntp.jst.mfeed.ad.jp]. Timezone: Select preferred time zone * Click [Save] to save changes.
- Page 12 11. On the [Setup] options, select [Advanced], then click [SIP/RIP] 50000〜60000 Network identity(port): Enter any number between 50000 and 60000. Please don’t enter the same number to the other devices. Time Support (RFC4028): Select [OFF]. * Click [Save] to save changes...
- Page 13 12. On the [Setup] options, select [Advanced], then click [QoS/Security] Filter Packets from Registrar： Select [off] Set password for “Administrator Password” Set User and Password for “HTTP Server” * Click [Save] to save changes...
- Page 14 [Never update, do not load settings]. PnP Config: Select [ON]. * Click [Apply] to save changes. *Click [Reboot] to reboot the device to apply all changes. Please refer to “Snom D735 wiki” if you want to see more about Snom D735 http://wiki.snom.com/D735...
- Page 15 14. Confirm device registration on customer management page. (1) Go to [Unique List] (2) Search the unique to which the device was assigned. This icon indicates that the settings were loaded successfully; device is registered and can now be used. This is shown if the device was not able register due to provisioning or other unexpected error.
- Page 16 VIEWING OF CALL HISTORY On the [Operation] options, select [Home]. You can view the call history on the figure below. Verify from Settings Screen Dialed Numbers: List of previously called/dialed numbers. Missed Calls: List of calls that is terminated before being answered by its intended recipient. Received Calls: List of calls answered by the call recipient.
- Page 17 SETTING BLOCKED NUMBERS On the [Operation] options, select [Directory]. Set blocked numbers in the [Add or Edit Entry] area. Example: Number: Type the number @XXX.XXX.XXX.XXXX (Server IP address). Number Type: Select [sip]. Contact Type: Select [Deny List]. Outgoing Identity: [Active] Then, click [Add/Edit].
- Page 18 SETTING PREFIX (184) *You can make an anonymous call if you put the prefix 184 in Japan. On the [Operation] options, select [Directory], then click [SIP]. Dial-Plan String: Enter [ ^(0[0-9]*)$|sip:184\1@\d;phone=yes| * You can set up the dial plan for this line here. With a dial plan, you can match user input (digits via keyboard) to specific actions like dialing, using a distinct outgoing identity, etc.
- Page 19 Save back up data of phone settings On the [Status] options, select [Settings]. Click “here” of Click here to save the settings. The setting file be displayed in a new tab on the browser. Ex.: http:// IP Address /settings.cfg Please copy the setting and paste it to Memo (Notepad), and save the file. *This setting is not including Unique ID, password and the other SIP information.
- Page 20 Upload back up data of phone settings On the [Setup] options, select [Advanced], then click [Update]. Select back up data file and click “Load” on Update Setting File manually...
- Page 21 Manual Software Update On the [Setup] options, select [Software Update]. Firmware: Enter [http://downloads.snom.com/fw/10.1.33.33/bin/snomD735-10.1.33.33-SIP-r.bin] Click [Load] to load the firmware *It takes few minutes to load the firmware. Please do not unplug or disconnect the device during firmware loading. *The Phone is delivered with preinstalled software (firmware), which allows operating your phone flawlessly. If you require updating the phone’s firmware please follow the instructions above.
- Page 22 Safety Precautions This manual contains precautions to assure user’s safety while using this product. If the precautions are disregarded, the extent of consequences is presented below. This indicates that ignoring or mishandling of this notice might result to death or serious injury to the person.
- Page 23 Troubleshooting Please check the troubleshooting procedure before requesting a repair. If the problem doesn’t get resolved, please contact us. Problem Solution Plug and Unplug from the power source. (Do this for few times). Wait for at least one minute before plugging the device. General Failure If the problem is not resolved after doing this, please contact our customer support service.