Putting One Participant On Hold; Dropping A Participant; Adding A Participant; Putting The Conference On Hold - Snom 760 User Manual

snom 760 User Manual

Putting one participant on hold

1. Put the participant on-screen, as shown in Conference screen navigation, above.
2. Press .
3. Press to return held participant to conference.

Dropping a participant

1. Put the participant on-screen, as shown in Conference screen navigation, above..
2. Press to terminate the connection to this participant.

Adding a participant

• Adding an incoming call:
1. Press or the blinking line key to accept the call. The conference is put on hold.
2. Press to restart the conference with the additional participant.
• Calling a new participant:
1. Press to put the conference on hold.
2. Dial the number of the new participant.
3. With the new participant on the line, press

Putting the conference on hold

• If one of the participants is on-screen (Figures C-2, C-3, C-4), you must first return to the screen
with all participants. See Conference screen navigation.
• With all participants on-screen (Fig. C-1), press
conference; you will see the "Calls on Hold" screen (see Holding multiple calls, Fig. H-4).
• To restart the conference, press

Terminating the conference

1. Press to put all participants on hold.
2. Select each participant in turn and press
.
. Technically, you are ending the
.
.
51
Using the Phone