Blind Transfer; Call Waiting - Snom D712 User Manual

D712/710 User Manual

Blind transfer

1. When you have a call on the line (Fig. 1) or when a call is ringing on the idle phone (Fig. 2), press
Xfer
.
Fig. 1
2. Dial the number of the third party you intend to transfer the call to - with call on line (Fig. 3) or
ringing (Fig. 4). You can enter the number manually or select one from a directory or list in the
"Pool" submenu.
Fig. 3
3. Press . The transferred call you were connected to is briefly shown as disconnected (Fig. 5); the
transferred ringing call is listed as a missed call (Fig. 6).
Fig. 5

Call waiting

The default setting is acoustic and visual announcement of calls waiting. Call waiting can be switched
to visual or acoustic announcement only or turned off completely for each configured identity on the
phone's web interface, Configuration Identity # > SIP tab > Call Waiting Indication. See also "Call
waiting" on page 78.
Default setting: When you are in a call, incoming calls will be announced acoustically by the sound of
a double beep and visually by the
Note: Any action you take, e.g., accepting or denying a call etc., will always affect the
on-screen call.
Fig. 1
Fig. 4
Fig. 2
Fig. 4
Fig. 6
symbol (Fig. 1) in the lower right corner.
Fig. 2
Fig. 5
51
Fig. 3
Fig. 6
Using the Phone