Appendix 2 Dedicated Instruction List And Available Devices - Mitsubishi Electric Q62DAN User Manual

APPENDICES

Appendix 2 Dedicated Instruction List and Available Devices

Instruction
G(P).OFFGAN
G(P).OGLOAD
G(P).OGSTOR
App - 5
(1) Dedicated instruction list
The following table lists the dedicated instructions that can be used with the D/A
converter modules.
Switches to the offset/gain setting mode.
Switches to the normal mode.
Reads the offset/gain values of the user range setting to the CPU.
Restores the offset/gain values of the user range setting stored in the
CPU to the D/A converter module.
POINT
When the module is mounted to a MELSECNET/H remote station, the dedicated
instructions cannot be used.
(2) Available devices
The following devices are available for the dedicated instructions:
Internal devices
1
Bit
X, Y, M, L, F, V, B
1: Word device bit designation can be used as bit data.
Word device bit designation is done by designating Word device . Bit No. .
(Designation of bit numbers is done in hexadecimal.)
For example, bit 10 of D0 is designated as D0.A .
However, there can be no bit designation for timers (T), retentive timers (ST) and
counters (C).
2: Available devices are given in each of the Constant field.
Description
Word
T, ST, C, D, W
MELSEC-Q
Reference section
Appendix 2.1
Appendix 2.2
Appendix 2.3
File register Constant
R, ZR
2
K, H
App - 5