Mitsubishi Electric Q62DAN User Manual page 139

7 ONLINE MODULE CHANGE
7 - 15
(2) Dismounting of module
(a) After choosing [Diagnosis] - [Online module change] on GX Developer to
enter the "Online module change" mode, double-click the module to be
changed online to display the "Online module change" dialog box.
(b) Click the "Execution" button to enable a module change.
If the following error dialog box appears, the user range cannot be saved.
Click the [OK] button, and perform the operation in Section 7.3.4 (2)(c) and
later.
MELSEC-Q
7 - 15