Mitsubishi Electric Q62DAN User Manual page 131

7 ONLINE MODULE CHANGE
7 - 7
(c) Click the [Close] button to close the System monitor dialog box.
(d) Set digital values to CH
Un\G1 to 8) and turn Operating condition setting request (Y9) from off to on.
Turn on CH Output enable/disable flag (Y1, Y2) of the used channel to
check whether proper conversion has been made or not.
(Be careful since analog outputs are provided actually.)
Digital value (buffer memory address 1 to 8:
MELSEC-Q
7 - 7