5 UTILITY PACKAGE (GX Configurator-DA)
5 - 18
(2) Command button
Make text file
The auto refresh settings are stored in an intelligent function module parameter file.
After being written to the CPU module, the auto refresh setting takes effect by
either (1) or (2).
(1) Cycle the RUN/STOP switch of the CPU module: STOP
(2) With the RUN/STOP switch set to RUN, turn off and then on the power or reset
the CPU module.
The auto refresh settings cannot be changed from sequence programs.
However, processing equivalent to auto refresh can be added using the FROM/TO
instruction in the sequence program.
Creates a file containing the data in text file format window.
Saves the set data and ends the operation.
Cancels the setting and ends the operation.
5 - 18