Mitsubishi Electric Q62DAN User Manual page 64

4 SETUP AND PROCEDURES BEFORE OPERATION
Number Name and appearance
1) RUN LED
2) ERROR LED
3) External power supply terminal
4) FG terminal
5) Serial number plate
4 - 4
Displays the operating status of the D/A converter module.
On
Flashing : During offset/gain setting mode
Off
Displays the error status of the D/A converter module.
On
Off
Flashing : Error in switch settings
This is the terminal for connecting the 24 V DC external power supply.
Frame ground terminal
Indicates the serial No. of the D/A converter module.
1: Check Error code for details.
Description
: Normal operation
: 5V power switched off, watchdog timer error occurred, or
online module change enabled
1
: Error
: Normal operation
Switch No. 5 of the intelligent function module has been
set to a value other than "0".
MELSEC-Q
4 - 4