[Static Convergence Adjustment] - Sony BVM-D32E1WA Maintenance Manual

• Offset state of 4-pole magnet
OFFSET state of
4-pole magnet
Fig. 1-15
• H.STAT and V.STAT adjustment method using 4-pole
magnet
1. Movement of red, green and blue dots when vertical
static convergence magnets are opened, closed and
slanted.
1 Open-close
2 Counter-clockwise direction
R
3 Clockwise direction
B
4 Adjustment by opening/closing in slant position
R
Fig. 1-16
BVM-D32E1WA/D32E1WE/D32E1WU
When they are
over lapped
B B
G G
R R
G B
G R
B
G G
B R

[Static Convergence Adjustment]

• Horizontal static convergence
1. Adjust the 4-pole magnet and the 6-pole magnet of the
neck assembly until the red and green dots are aligned
in the horizontal direction at the center of screen.
2. If the blue dots are mis-aligned against the red and
green dots, adjust as follows.
Adjust the HMC (horizontal mis-convergence)
correction using the 6-pole magnet of the neck assem-
bly. (Refer to Fig. 1-2.)
• Vertical static convergence
1. Adjust the 4-pole magnet and the 6-pole magnet of the
neck assembly until the red and green dots are aligned
in the vertical direction at the center of screen.
Note: The V. STATIC CONV. adjustment menu is located
in the lower layer of the E board menu of the
MAINTENANCE menu.
2. If the blue dots are mis-aligned against the red and
green dots, adjust as follows.
Adjust the VMC (vertical mis-convergence) correction
using the 6-pole magnet of the neck assembly. (Refer
to Fig. 1-2.)
Fig. 1-17
3-11