Profinet Setting; Figure 3.9 Protocol Setting > Profinet Setting - Advantech EKI-1221IEIMB User Manual

3.5.2

PROFINET Setting

On the PROFINET network, the gateway transmits mapped data to PROFINET I/O
Slot.
There are two types of slot mappings as defined in the following figure.
The PROFINET Setting page is only available for EKI-1221IPNMB.
To access this page, click Protocol Setting > PROFINET Setting.
The following table describes the items in the previous figure.
Item
Device Status/Control
Word in Slot
Exception Code in Slot
Read / Write Community
Submit
Figure 3.9 Protocol Setting > PROFINET Setting
Description
When enabled, Device Status/Control Word should be in
PROFINET slot 1. The Modbus exception codes should be in
PROFINET I/O slot 2.
When disabled, the Modbus exception codes should be in
PROFINET I/O slot 1.
Default value is Disabled.
Enable to use the Modbus exception code setting, see Device
Status/Control Word in Slot in previous definition.
Enter the value for the SNMP Read/Write Community string
(default: Public).
Click Submit to save the values and update the screen.
24 EKI-1221IEIMB | PNMB User Manual