Cleaning and maintenance
3 x
3 x
40
5.9
First remove the left acrylic glass panel:
–
Remove the screws.
–
Remove the acrylic glass panel and carefully lay it aside.
3 x
10987 / 1
Upper lamp cover:
–
Loosen screws 3-4 mm.
–
Take off the lamp cover.
Replace the lamps: See page 37.
Replace the starter: See page 38.
Right acrylic glass panel:
–
Remove the screws.
3 x
10649 / 1
Clean or replace lamps on the side
walls
WARNING!
Soiling on the panels is burned in by the hot lamps and
results in the long term in unserviceable panels.
–
Remove fingerprints and other soiling carefully.
NOTE:
There is a risk of damage being caused to the acrylic glass
panels and the cockpit control and the side walls!
–
Observe the order: First remove the acrylic cover on
the left and then the one on the right.
–
Do not knock the right acrylic glass panel against the
cockpit control when removing it.