Cleaning The Surfaces; Filter Panels And Lamps - ergoline INSPIRATION 600 Operating Instructions Manual

Cleaning and maintenance
38/68
4.3.1

Cleaning the surfaces

Acrylic glass surfaces
WARNING!
Do not rub with a dry cloth – danger of scratching!
Failure to comply invalidates any warranty claims.
– For the fast, hygienic and proper cleaning of acrylic
glass surfaces, use specially developed cleaning
agents.
– Concentrated disinfectants or solvents (e.g. Lysoform,
ethyl alcohol or other fluids containing alcohol) must
never be used for cleaning.
Acrylic glass panels unusable due to soiling!
Soiling on the panels is burned in by the hot lamps and
results in the long term in unserviceable panels.
– Remove fingerprints and other soiling carefully.
Plastic surfaces
For cleaning the remaining painted and unpainted plastic surfaces, it is best to
simply use warm water and a leather cloth. Never use aggressive cleaning
agents containing alcohol or essential oils. These may lead, in the long run, to
damages not covered by the guarantee.
During cleaning a slight discolouration of the leather cloth by the rubber seals
must be expected for production-related reasons.
Prevent damage to the acrylic glass and plastic surfaces.
– Remove rings, watches, bracelets etc. before starting cleaning work.
4.3.2

Filter panels and lamps

UV low pressure lamps and filter panels can be cleaned with a damp

cloth and without additional cleaning agents where necessary.
UV high pressure lamps can be cleaned with ethyl alcohol where neces-

sary.