Operation
30
4.8
Connect MP3 player
DANGER!
Danger of hearing damage!
Using earphones or headphones at high volume can result
in permanent hearing damage.
–
Do not set the volume too high.
Users may connect their private MP3 players to the collagen device if the
Audio system accessory is fitted.
1. Mat.-Nr. 1001855-.. provided for use by the studio operator
(1.5 m / 2 x 3.5 mm stereo jack plug).
2. MP3 player connection: see the documentation from the manufacturer of
the MP3 player.
Connect:
–
Plug the MP3 cable (stereo jack plug) into the Audio system.
–
Plug the MP3 cable into the MP3 player.
–
Select the music title and start.
If the speakers do not play any music:
–
Increase the volume on the MP3 player until the music signal is
automatically switched to the Audio system.
–
Set the volume on the collagen device to the desired level.
WARNING!
Heat damage to the MP3 player is possible
–
Do not position it directly in the radiation area.
Cable may break-off, cable jacks may be damaged!
–
Do not pull on the cable when unplugging the MP3 player.