ergoline BEAUTY LOUNGE COLLAGEN Operating Instructions Manual page 96

10/2009 1007994-00A
– The panel must be taken out past the cockpit control. Ensure that you do
not scratch the panel.
– Carefully pull the panel past the back of the cockpit control and remove to
the left.
Upper lamp cover:
– Loosen screws 3-4 mm.
– Take off the lamp cover.
Replace the lamps: See page 37.
Replace the starter: See page 38.
The assembly is the same process in reverse order.
When assembling the device please note:
– Always replace the right acrylic glass panel first.
Cleaning and maintenance
Operating instructions – 41