Starter; Clean Or Replace Lamps In The Door - ergoline BEAUTY LOUNGE COLLAGEN Operating Instructions Manual

Cleaning and maintenance
38
5.7.2

Starter

Replace faulty starters immediately.
You can recognise a faulty starter by the blackened ends of the UV low-
pressure lamps or when the lamp can no longer be started.
Operating a lamp with a faulty starter significantly shortens its service life. The
lamp loses power and may begin to flicker under certain circumstances.
The starters are located in either one of the two lamp sockets or are visible
when the lamps are removed.
– Turn 90° and carefully remove from the socket.
5.8

Clean or replace lamps in the door

WARNING!
Acrylic glass panels usable due to soiling!
Soiling on the panels is burned in by the hot lamps and
results in the long term in unserviceable panes.
– Remove fingerprints and other soiling carefully.
Door handle:
– Remove the screws and remove door handle.
Acrylic glass panel:
– Remove the screws.
– Remove the acrylic glass panel and carefully lay it aside.