Ssh Parameter Configuration - Zte W800A Installation Instructions Manual

ZXR10 WAS (V2.0) IP Wireless Access System W800A Wireless Access Point
Parameter Name
<End-Mark>
<string>
12. snmp trap enable
13. snmp traphost
Parameter Name
<A.B.C.D>
<value>

3.4.22 SSH Parameter Configuration

1.
2.
3.
Professional Installation Instruction Manual
Value Range
Any character.
1 ~ 255 characters
Command mode: Configure mode
Function: Enabling or disabling SNMP Agent to send trap.
Command format: [no] snmp trap enable
Command mode: Configure mode
Function: Adding a trap target host address and trap version number
information.
Command format: [no] snmp traphost <A.B.C.D> [version <value>]
Parameter descriptions:
Value Range
IP address
1~2
ssh server enable
Command mode: Configure mode
Function: Enabling or disabling SSH function.
Command format: [no] ssh server enable
ssh server only
Command mode: Configure mode
Function: Enabling or disabling SSH function, and disabling Telnet function.
Command format: [no] ssh server only
ssh server generate-key rsa
Parameter Descriptions
Serving as the end mark of inputting character
string.
RFC1213, a management variable in the MIB
system group, and it is the name of the managed
equipment.
Parameter Descriptions
trap target host address.
trap version number.
3-28