Zte W800A Installation Instructions Manual page 52

ZXR10 WAS (V2.0) IP Wireless Access System W800A Wireless Access Point
Professional Installation Instruction Manual
Parameter descriptions:
Parameter Name
<End-Mark> Any character.
<string> 1 ~ 255 characters
6. snmp enable
Command mode: Configure mode
Function: Enabling or disabling the SNMP management function.
Command format: [no] snmp enable
7. snmp location
Command mode: Configure mode
Function: Configuring the geographic location information of the managed
equipment.
Command format: snmp location <End-Mark > <string>
Parameter descriptions:
Parameter Name
<End-Mark> Any character.
<string> 1 ~ 255 characters
8. snmp nodecode
Command mode: Configure mode
Function: Configuring the NE code information of the managed equipment.
Command format: snmp nodecode <value>
Parameter descriptions:
Value Range
Serving as the end mark of inputting character
string.
A management variable content in the MIB II
system group, containing the name and contact
method of the equipment manager.
Value Range
Serving as the end mark of inputting character
string.
sysLocation, a management variable in the MIB
system group, describing the geographic location of
the managed equipment.
3-26
Parameter Descriptions
Parameter Descriptions