Zte W800A Installation Instructions Manual page 35

Command mode: Configure mode
Function: Configuring the IP address parameters of the default gateway of the
DHCP server.
Command format: dhcp server gateway <A.B.C.D>
Parameter descriptions:
Parameter Name
<A.B.C.D> IP address
3. dhcp server leasetime
Command mode: Configure mode
Function: Configuring the address lease time of the DHCP server.
Command format: dhcp server leasetime <value>
Parameter descriptions:
Parameter Name
<value> 60~3600
4. dhcp server run
Command mode: Configure mode
Function: Starting, stopping or restarting the DHCP server.
Command format: dhcp server run {start|stop|restart}
Parameter descriptions:
Parameter Name
{start|stop|restart} Start, stop , restart
5. dhcp server start-flag
Command mode: Configure mode
Function: Configuring the start flag of the DHCP server when the system is
restarted.
Command format: dhcp server start-flag {true|false}
Value Range
IP address of the gateway.
Value Range
The address lease time of the DHCP server, 6 by
default.
Value Range
start: Startup;
Stop: Stopping;
restart: Restarting.
3-9
Chapter 5 Command Line Configuration
Parameter Descriptions
Parameter Descriptions
Parameter Descriptions