Zte W800A Installation Instructions Manual page 51

2. snmp access-mode
Command mode: Configure mode
Function: Configuring the local agent can be accessed by all the hosts or the host
in access-host.
Command format: snmp access-mode {all|list}
Parameter descriptions:
Parameter Name
{all|list} All, list
3. snmp authtrap
Command mode: Configure mode
Function: Enabling or disabling the community string authentication.
Command format: [no] snmp authtrap enable
4. snmp community
Command mode: Configure mode
Function: Configuring the SNMP access community string and its accessing
authority.
Command format: snmp community <string> {read-only| read-write}
no snmp community <string>
Parameter descriptions:
Parameter Name
<string> 1 ~ 32 characters
{read-only| read-only,
read-write} read-write
5. snmp contact
Command mode: Configure mode
Function: Configuring the name and contact method of the equipment manager.
Command format: snmp contact <End-Mark >
Value Range
all: All the users can access it.
list: The users in access-host can access it.
Value Range
SNMP access community string name (at most 10).
<string> is a character string with at most 32
characters.
read-only: Read-only authority.
read-write: Read-write authority.
3-25
Chapter 5 Command Line Configuration
Parameter Descriptions
Parameter Descriptions
string>
<