Table of Contents
Advertisement
ZXR10 WAS (V2.0) IP Wireless Access System W800A Wireless Access Point
3.4.3 Configuring the Configuration Server
Command mode: Configure mode
Function: Configuring the parameters of configuration server: IP address, interception
port number of the TCP and the interception port number of UDP.
Command format: config-server {ipaddress <A.B.C.D> [tcp-port <value
[udp-port <value
[ipaddress <A.B.C.D> [udp-port <value
<A.B.C.D>]] | udp-port <value
tcp-port <value
Parameter descriptions:
Parameter Name
<A.B.C.D>
<value
<value
Note: One or multiple parameters can be configured randomly. The un-configured
parameters will keep unchanged.
3.4.4 DHCP Server Configuration
1.
Parameter Name
<A.B.C.D
<A.B.C.D
2.
Professional Installation Instruction Manual
2
>] | udp-port <value
1
> [ipaddress <A.B.C.D>]]}
Value Range
IP address
1
>
3000~65535
2
>
3000~65535
dhcp server dns
Command mode: Configure mode
Function: Configuring the IP address parameters of the master and slave DNS
servers of the DHCP server.
Command format: dhcp server dns <A.B.C.D
Parameter descriptions:
Value Range
1
>
IP address
2
>
IP address
dhcp server gateway
2
> [tcp-port <value
2
>] | udp-port <value
2
> [ipaddress <A.B.C.D> [tcp-port <value
Parameter Descriptions
IP address of the configuration server
The interception port number of tcp, 3601 by
default.
The interception port number of udp, 3600 by
default.
1
> [<A.B.C.D
Parameter Descriptions
IP address of the master DNS server.
IP address of the slave DNS server (optional).
3-8
1
>]] | tcp-port <value
2
> [ipaddress
1
>] |
2
>]
1
>
1
>
Advertisement
Table of Contents
