Zte W800A Installation Instructions Manual page 63

Command format: show iapp
8. show interface
Command mode: Configure mode
Function: Showing the parameter information of the interface configuration.
Command format: show interface {ethernet|wlan} {0|1}
9. show ip
1) show ip address
Command mode: Configure mode
Function: Showing IP address information.
Command format: show ip address
2) show ip pool
= show ip pool config
Command mode: Configure mode
Function: Showing all the IP address pool information.
Command format: show ip pool config
= show ip pool used
Command mode: Configure mode
Function: Showing the used IP address information in the specified IP address
pool.
Command format: show ip pool used <value>
Parameter descriptions:
Parameter Name
<value> 0~9
3) show ip route
Command mode: Configure mode
Function: Showing the parameter information of the IP route configuration.
Command format: show ip route
Value Range
Serial number of the IP address pool
3-37
Chapter 5 Command Line Configuration
Parameter Descriptions