Table of Contents
Advertisement
ZXR10 WAS (V2.0) IP Wireless Access System W800A Wireless Access Point
Parameter Name
<module>
4.
3.4.16 MAC Filtration Configuration
Command mode: Configure mode
Function: Adding or deleting a number accessing list.
Command format: [no] mac-access-list <value> {deny|permit}
{<xx-xx-xx-xx-xx-xx>|any}
Parameter descriptions:
Parameter Name
<value>
{deny|permit}
Professional Installation Instruction Manual
Value Range
Specified
names:
BSP, DATABASE,
80211, BRIDGE,
IAPP, DHCP,
IPPOOL, DOT1X,
RADIUS, ACL,
SVCMANAGE,
TELNET, WEB,
CONSOLE, SNMP,
ALARM, R01,
TFTP, DISCOVER,
QOS
logmsg telnet-log
Command mode: Configure mode
Function: Configuring the current Telnet window as the output window of the
log printing messages
Command format: [no] logmsg telnet-log
Value Range
1~99
deny, permit
Parameter Descriptions
module
The module containing the log printing messages.
Parameter Descriptions
MAC filtration group ID
deny: If the condition is satisfied, the MAC
communication will be denied.
permit: If the condition is satisfied, the MAC
communication will be permitted.
3-20
Advertisement
Table of Contents
