Zte W800A Installation Instructions Manual page 53

Parameter Name
<value> 0~241920000
9. snmp nodecreatdate
Command mode: Configure mode
Function: Configuring the creation time information of the NE of the managed
equipment.
Command format: snmp nodecreatdate <hh:mm:ss> <month> <day> <year>
Parameter descriptions:
Parameter Name
<hh:mm:ss> 0~241920000
<month> 1~12
<day> 1~31
<year> 2002~2130
hh:mm:ss month day year is a management variable in the MIB system group,
describing the creation time of the NE of the managed equipment.
10. snmp nodeid
Command mode: Configure mode
Function: Configuring the NE ID information of the managed equipment.
Command format: snmp nodeid <string>
Parameter descriptions:
Parameter Name
<string> 0 ~ 31 characters
11. snmp sysname
Command mode: Configure mode
Function: Configuring the name of the managed equipment.
Command format: snmp sysname <End-Mark > <string>
Parameter descriptions:
Value Range
A management variable in the MIB system group,
describing the NE code of the managed equipment.
Value Range
hh (hour):mm (minute): ss (second)
Month
Date
Year, 4 bits are needed.
Value Range
A management variable in the MIB system group,
describing the NE ID of the managed equipment.
3-27
Chapter 5 Command Line Configuration
Parameter Descriptions
Parameter Descriptions
Parameter Descriptions