Security Parameter Configuration - Zte W800A Installation Instructions Manual

[priority <value
Parameter descriptions:
Parameter Name
<string>
<value
<value
<value

3.6.7 Security Parameter Configuration

1.
Parameter Name
{none|wep64|
wep128|wep152|
wpa-eap-tls|
wpa-psk}
{Alphanumeric|
Hexadecimal}
{TKIP|AES }
2.
3
>]
Value Range
1 ~ 32 characters
1
> 1~4094
2
> 1~30
3
> 0~7
security mode
Command mode: Wireless interface configure mode
Function: Configuring the security mode.
Command format: security mode {none|wep64|wep128|wep152|wpa-eap-tls|
wpa-psk} {Alphanumeric|Hexadecimal} {TKIP|AES}
Parameter descriptions:
Value Range
none,
wep64,
wep128,
wep152,
wpa-eap-tls,
wpa-psk
Alphanumeric,
Hexadecimal
TKIP, AES
security wep set-key
Command mode: Wireless interface configure mode
Function: Configuring the WEP encryption secret key.
Command format:
Chapter 5 Command Line Configuration
Parameter Descriptions
ESSID name.
The VLAN ID corresponding to the ESSID.
The maximum user quantity corresponding to the
ESSID.
The priority corresponding to the ESSID.
Parameter Descriptions
none: No encryption
wep64: Encryption of WEP 64-bit secret key mode.
wep128: Encryption of WEP 128-bit secret key
mode.
wep152: Encryption of WEP 152-bit secret key
mode.
wpa-eap-tls: Encryption of wpa mode.
wpa-psk: Encryption of wpa-psk mode.
Alphanumeric: WEP secret key is in the character
string format.
Hexadecimal:
hexadecimal format.
Configuring the WPA encryption mode.
security wep set-key
3-47
WEP secret key is
{key1|key2|key3|key4}
in the