Table of Contents
Advertisement
ZXR10 WAS (V2.0) IP Wireless Access System W800A Wireless Access Point
follows:
1.
2.
3.
4.
5.
3.2 User Mode
Entering mode: Telnet
Exiting mode: exit
Default prompt character: wlan>
Note: After logging on to the W800A in Telnet, the common user can enter the user
mode only once the user name and password authentications are passed. The default
user name is "root" and default password is "public". To avoid the case in which the
illegal user tries with different passwords, the system will automatically disconnect
from the Telnet of a user, after this user inputs wrong password for consecutive three
times.
3.2.1 Entering the Privileged Mode
Command mode: User mode
Function: Input the correct password to enter the privileged mode.
Command format: enable
Note: After the user inputs the enable command and press ENTER, the system will
prompt that password need be input. The default password of privileged mode is "zte".
3.2.2 Exiting the Telnet Configuration
Command mode: User mode.
Function: Exiting the user mode and returning to the system.
Command format: exit.
Professional Installation Instruction Manual
abc refers to the command or keyword.
<abc> refers to the contents to be input by the user.
abc|def indicates that one of the two will be selected.
For the contents included in [ ], the user can choose to input or not input them..
For the contents included in { }, the user must input them.
3-4
Advertisement
Table of Contents
